Skip to content
Up to 35% off sale on NOW! Limited time, limited stock. Ends Feb 23 unless sold out. We'll be closed Feb 19-21 inclusive. Dispatch delays may occur. Thanks for your patience.
Up to 35% off sale on NOW! Limited time, limited stock. Ends Feb 23 unless sold out. We'll be closed Feb 19-21 inclusive. Dispatch delays may occur. Thanks for your patience.
Neptune Systems AquaBus Cable Aquatic Supplies Australia

Neptune Systems AquaBus Cable

by Neptune Systems
CODE ABUS15EXT
Save 36% Save 29%
$55.00
$45.00 - $55.00
$55.00
$39.00
$35.00 - $45.00
$39.00
Availability:
Out of stock
Availability:
Out of stock
Availability:
2 in stock.
Length: Aquabus 15′ Extension Cable M/F

Aquabus is the communication link between your Apex and most of the modules.  The cable itself looks just like a USB cable, but it is not to be confused with a USB cable.  Connecting a computer or USB accessory, like your phone, to the Aquabus will likely result in damage to that accessory and possibly to the Apex.

There are two types of Aquabus cables.  One is for connecting Neptune Systems’ modules together and the other type is an extension cable. The Aquabus cables can be connected in any manner you wish— just don’t create a loop. You can daisy chain or use the connectors on your Energy Bar to make a star configuration.

Aquabus 3′ Cable

This is a three foot Male/Male Aquabus cable that connects one module to another.  This cable is included with some of our expansion modules.  The 3′ cable is a great solution for when you have modules in close proximity but not right next to each other.

Aquabus 6′ Cable

This is a six foot Male/Male Aquabus cable that connects one module to another.  This cable is included with our power bars and some other modules.  This cable allows you to connect Apex components on opposite sides of your tank.  A great example might be  to connect an Energy Bar 8 on the right side of your tank and another Energy Bar on the left side of your tank.

Aquabus 15′ Cable

This is a fifteen foot Male/Male Aquabus cable that connects one module to another.  This cable is intended to connect modules over greater distances.  It is only included with our Automatic Feeding System (AFS).  It is a great solution when needing to connect Neptune Systems’ devices above or below your tank.

Aquabus 15′ Extension Cable

This is a fifteen foot Male/Female Aquabus cable that is used as an extension cable.  So if you have a 3′ foot Aquabus cable that came with your PM2 and need to go 18′, then the 15′ extension cable is the perfect solution to make that 18′ distance possible.

Aquabus 30′ Cable

This is a thirty foot Male/Male Aquabus cable that connects one module to another or connects to an Aquabus extension cable.  This cable is intended to connect modules from one location to another.  It is not included with any of our products. This is a great solution when your filtration area or life support area is in a different location from your aquarium.

Aquabus 30′ Extension Cable

This is a thirty foot Male/Female Aquabus cable that is used as an extension cable to connect Neptune Systems’ products over great distances. So if you have the aquarium in your basement and your other aquarium in your kitchen (because who has just one aquarium?), then you can control all of that from one Apex System! Use the 30′ Aquabus cable along with the 30′ Aquabus extension cable, then you can run two aquariums that are 60 feet apart.

NOTE: You can have up to 200′ of Aquabus cable per system and it is recommended that you have one powered Neptune Systems accessory (i.e. Energy Bar or 1LINK module) every 75′.

Aquabus is the communication link between your Apex and most of the modules.  The cable itself looks just like a USB cable, but it is not to be confused with a USB cable.  Connecting a computer or USB accessory, like your phone, to the Aquabus will likely result in damage to that accessory and possibly to the Apex.

There are two types of Aquabus cables.  One is for connecting Neptune Systems’ modules together and the other type is an extension cable. The Aquabus cables can be connected in any manner you wish— just don’t create a loop. You can daisy chain or use the connectors on your Energy Bar to make a star configuration.

Aquabus 3′ Cable

This is a three foot Male/Male Aquabus cable that connects one module to another.  This cable is included with some of our expansion modules.  The 3′ cable is a great solution for when you have modules in close proximity but not right next to each other.

Aquabus 6′ Cable

This is a six foot Male/Male Aquabus cable that connects one module to another.  This cable is included with our power bars and some other modules.  This cable allows you to connect Apex components on opposite sides of your tank.  A great example might be  to connect an Energy Bar 8 on the right side of your tank and another Energy Bar on the left side of your tank.

Aquabus 15′ Cable

This is a fifteen foot Male/Male Aquabus cable that connects one module to another.  This cable is intended to connect modules over greater distances.  It is only included with our Automatic Feeding System (AFS).  It is a great solution when needing to connect Neptune Systems’ devices above or below your tank.

Aquabus 15′ Extension Cable

This is a fifteen foot Male/Female Aquabus cable that is used as an extension cable.  So if you have a 3′ foot Aquabus cable that came with your PM2 and need to go 18′, then the 15′ extension cable is the perfect solution to make that 18′ distance possible.

Aquabus 30′ Cable

This is a thirty foot Male/Male Aquabus cable that connects one module to another or connects to an Aquabus extension cable.  This cable is intended to connect modules from one location to another.  It is not included with any of our products. This is a great solution when your filtration area or life support area is in a different location from your aquarium.

Aquabus 30′ Extension Cable

This is a thirty foot Male/Female Aquabus cable that is used as an extension cable to connect Neptune Systems’ products over great distances. So if you have the aquarium in your basement and your other aquarium in your kitchen (because who has just one aquarium?), then you can control all of that from one Apex System! Use the 30′ Aquabus cable along with the 30′ Aquabus extension cable, then you can run two aquariums that are 60 feet apart.

NOTE: You can have up to 200′ of Aquabus cable per system and it is recommended that you have one powered Neptune Systems accessory (i.e. Energy Bar or 1LINK module) every 75′.